Wood Plastic Composite Production Line WPC Board Production LineMain technical parameter
|Screw Dimater(mm)||51/105 ||65/132||80/156||92/188|
|Screw Rotation Speed ||45 ||45||34.7||34.7|
|Driving Motor (kw) ||22 ||37 ||55 ||110 |
|Output Capacity (kg,h) ||125||380 ||500 ||1000|
|Center Height ||1000||1000||1000 ||1250 |
|Net Weight(kg) ||3000||4000 ||5500 ||8800|
|Dimension(M) ||3.6x1.1x2.1 ||4.2x1.5x2.4 ||4.7x1.5x2.4 ||6x1.6x2.5 |
Wood Plastic Composite Production LineCWE65/132 CONE TWIN SCREW EXTRUDER
(INCLUDING ELECTRICITY CONTROL SYSTEM)
MAIN MOTOR POWER: 37KW
SCREW DIAMETER: 65/132mm
SCREW LENGTH: 1480mm
SCREW ROTATING DIRECTION: ANTI-CLOCKWISE OUTSIDE
SCREW ROTATING SPEED: 1-34.5rpm
VACUUM VENTING SYSTEM: 1.5KW
HEATING POWER: 25KW
Wood Plastic Composite Production Line
CONTROL SYSTEM EQUIPMENT: Adoption ABB direct current timing and RKC imported temperature control meter; Screw Core Part: Adoption natural cooling circle temperature adjusting system; Main Machine equipped with vacuum pump venting system, raw material input quantity control device, raw material smelting press and temperature displaying meter.
Detail Technical Parameter:
(1)Screw is specially designed for WPC profiles extruding.
(2)Strictly nitrogen-processing technique. Nitrogen-processing hardness:screw≥740 HV; main machine canister≥940 HV; Nitrogen-processing deepness: main machine canister 0.4~0.7mm; screw:0.4~0.6mm.
(3)Gear-box is horizontally-installation on ground. Transmission adopts rigid surface bevel wheel, gear-box's gear: 20CrMoTi and be processed by carburizing and grinding treatment, distribution-box's gear: 38CrMoSALA and be processed by nitride-treat, axle: 40Cr, distribution-box adopt superior thrust-bearing.
(4)Screw cooling adopts core part outside circle oil cooling system.
(5)Main Motor adopts imported timing device, temperature control mater adopt RKC, control
cabinet adopt Siemens contactor, circuit trim.
(6)Main machine and Raw material input can be synchronized adjusting. Also can be regulated respectively. Main machine with automatically-protection stopping device.
C.Mould profile tool
D.Vacuum shaping table
Shaping table effective length: 4.5M
Machine table, sink, water tank, fasteners made of superior stainless steel.
Shaping table can be regulated from three dimensions. Longitudinal moving by machine; lateral,
up and down moving by hand.
Vacuum pump: 2 sets, Power 5.5kw/set;
Supercharging pump: 1 set; Power: 4kw
Water temperature meter; Press meter; the most degree of vacuum: 0.08Mpa
Cutting method: photoelectric metering cutting
G.Turnover rack system
Faceplate and dam-board made of superior stainless steel
COOWIN series conical twin screw extruder is a highly efficient agglomeration and extruding equipment. Machines of this series feature low shearing rate, uneasy degradation,even plastication and agglomeration, reliable quality,wide application range and long servicing life. Using PE powder as raw material for a direct forming, the exturders perform an excellent effectiveness. These machines have automatic temperature control, vacuum gas exhaustion, oil cooled screws, stepless speed regulation, as well as a forced and self-cleaning mechanism.
Wood Plastic Composite Production Line
Wood Plastic Composite Production Line The design conception:
· High production capacity and high velocity extrusion on the high quality base;
· Low temperature plasticization design guarantees high quality product.
· Two stages styles unitary design, reinforcing plasticization capacity guaranteed high performance and high velocity extruding.
· the particular kind of barrer, BM type synthetical blending design guaranteed mixing efect
· High twisting force output, the huge thrust bearing;
· the gear and shaft is high intensity alloy stell and are treated in the light of requirements.
· Material character is 38CrMoAL/A, nitrogen treatment;
· Strict temperature control accuracy, wind cooling and water cooling unit;
· The distinctive feeding inlet with consummate water-cooling unit design.
· The barrel with channel surface feeding base suit has the function of increasing capacity, which ensure high efficiency and production capacity.Our partner
Coowin PP/PE WPC Profile Extrusion Production Machine Lin is a highly efficient agglomerating and extruding equipment. Machines of this series feature low shearing rate, uneasy degradation, even plastication and agglomeration, reliable quality, wide application range and long servicing life. Using wpc particles as raw material for a direct forming, the exturders perform an excellent effectiveness. These machines have automatic temperature control, vacuum gas exhaustion, oil cooled screws, stepless speed regulation, as well as a forced feeding and sef-cleaning mechanism.Company Information
QINGDAO BAREFOOT CONSTRUCTION MATERIAL CO.,LTD(COOWIN GROUP) is a High-Tech company, which is composed of well-experienced team in R&D, manufacturing technique, sales service and basing on extruder industry for many years. Our company is a professional manufacture of high quality pelletizing extruders for coloring/ dyeing and master batch production, as well as plastic modification and compounding, plastic recycling. Innovation machines are built as per the concept of durability, high efficiency and economical power consumption.
QINGDAO BAREFOOT CONSTRUCTION MATERIAL CO.,LTD(COOWIN GROUP) has a professional sales team, personal contact with customers, regular reminders and solve installation, maintenance, repair and other problems encountered by customers in the mechanical operation of the equipment failure analysis and quick to do the maintenance program, in any country and region can get our professional and technical personnel of the most timely and quality service.
• Introduce products in detail • Recommend suitable solution • Offer test
• Provide layout and engineering conditions • Offer screw plan and related documents
• Inform the project processing status • Insure the product designed in accordance with technical document
• Provide installation, commissioning and training • Offer spare parts
• Provide necessary technical support and update information.
1. Q: What is the MOQ?
R: We are the manufacturer of extruder machine. Also we provide the whole set of plastic pellet production line solution. So you can also buy spare parts and auxiliaries of the extruder in our company.
2. Q: What's the delivery time?
R: Usually the processing period is around 40 days. Before you place the order or before we send it out, we warmly welcome you come to visit and check the extruder!
3. Q: How to contact with us?
R: Please send an inquiry to me directly if you have any question.